LEAN SCHOOL Kropelka Sekundenkleber 2 ml

• Instant glue, easy to use
• Bonds within seconds!
• Glue flows drop by drop
• Tube stands upright on its own
• Does not spray, does not leak

Kropelka is an instant glue that is always worth having in your home toolbox due to its practicality, effectiveness, and reliability.

• Its use is very easy, just remember four simple steps.

Opening

To open the tube for the first time, take the tip with the dispenser and screw it all the way onto the tube thread until the membrane is pierced.

Checking the surface

The surfaces to be bonded must fit together exactly. Make sure both surfaces are clean.

Application

Remove the cap from the tip. Press the tube in the marked places to measure and squeeze out a single drop onto only one of the two surfaces to be bonded.

Press the surfaces together

• Hold both bonded parts pressed together for 60 seconds.

Using the product

To open the Kropelka tube for the first time, screw the dispenser connected with the cap onto the tube thread until the membrane is pierced. Be careful not to squeeze the tube too hard to avoid spilling the glue.

Applying a small amount will give you a better bond and the glue will set faster.

It is best not to subject the fresh bond to forces and loads before 1 hour has passed.

Remember that Kropelka does not bond polyolefins (polyethylene and polypropylene), Teflon (PTFE), EVA rubber, or silicone.

Kropelka is ideal for bonding parts that fit well together; it does not have gap-filling properties.

Kropelka provides the strongest bond at room temperature and withstands up to 60°C, depending on the application.

• Kropelka is not flammable.
• Kropelka does not withstand direct contact with flame.

For large surfaces, apply drops at intervals of 2 cm apart, always on only one of the surfaces.

Recommendations and precautions

If Kropelka spills during a repair, wipe it immediately with acetone. Before using acetone, first check in an inconspicuous place whether the solvent will damage the surface.

Remember - if the Kropelka dispenser is clogged, never squeeze the tube forcefully.

Unclog the tube tip with a pin, holding the tube so that it is not pointed at your body.

To make the same tube of Kropelka glue last as long as possible and be reusable, screw it tightly and store in a cool, dry place, preferably standing upright on its base. After use, wipe the applicator tip with a dry tissue or absorbent paper.

If Kropelka gets on your hands, it is best to wash them with plenty of lukewarm water; remove larger pieces of hardened glue with a gentle abrasive material (such as pumice) under running water. Then apply cream to your hands to soften the skin.

• If Kropelka gets into your eyes, do not close your eyelids.

Rinse them with plenty of lukewarm water and consult a doctor immediately.

Warnings

Kropelka is not approved for medical or veterinary use, therefore we do not recommend using it on any part of the body of humans, animals, or on dental appliances or prostheses.

• Caution!
• Use the product according to the manufacturer's recommendations.
• Before use, read the warnings and safety information.

In case of contact with eyes, skin, or if swallowed - seek medical advice immediately and show the packaging or product label.

Keep out of reach of children. Avoid inhaling vapors and contact with eyes.

Detailed information on properties, hazards, and emergency procedures can be found in the Safety Data Sheet (SDS), available for download at the link below.

Kropelka is a fast-drying and highly effective instant adhesive designed for durable bonding of various materials. It is easy and clean to use, making it ideal for both everyday household repairs and professional applications.

The adhesive is suitable for bonding metal, rubber, glass, porcelain, wood, and many types of plastics. It is widely used in workshops, automotive repairs, modeling, jewelry making, watchmaking, and electronics.

It can also be used for reinforcing and securing screws, nuts, fishing line knots, and other small components requiring a strong bond.

Product specifications

• Brand: Kropelka / Poxipol
• Type: instant adhesive
• Capacity: 2 ml
• Contains cyanoacrylate
• Fast and durable bonding
• Easy and clean to use
• Suitable for metal, rubber, glass, porcelain, wood, and plastic
• Ideal for household, automotive, hobby, and technical applications
• Master carton: 6 pcs
• Product length in centimeters: 8
• Product height in centimeters: 3
• Product width in centimeters: 3